Reset Access Gateway command line

You can reset the Access Gateway Management console. To do so, you must use the command line to open a Secure Shell (SSH) connection to the new instance:

ssh oag-mgmt@admin oag-mgmt@... password:OktaMgmt@123 Password: <default-password>

See Default Access Gateway credentials for more information on default credentials in Access Gateway.

Reset the gateway

At the command-line main menu:

  1. Enter 5 - System.
  2. Enter 7 - Reset.
  3. Enter Y to clear the configuration.
  4. Enter Y to initialize the system.

The instance may pause for 1-2 minutes during reset.

After the system is initialized successfully, press any key to return to the menu.

Verify Configuration

  1. Enter x to return to the main menu.
  2. Enter 1 - Network.
  3. Enter 2 - Test network configuration. Okta Access Gateway attempts to contact www.okta.com and report any errors.
  4. Enter 7 - Connectivity test. Enter www.okta.com as host and 443 as port.
  5. Confirm that the connection was successful.