Test Kerberos application

Testing a Kerberos application involves validating round trips using both SP or IDP tests.



Configure application debug

To enable debug for application testing:

  1. Navigate to the Access Gateway Admin UI console
  2. From the Topology tab or the Applications tab, open the application.
  3. Select the Settings pane.
  4. Expand the Advanced sub-tab.
  5. Set the Debug toggle to Enable.
    The debug toggle, which can be found in the Advanced application settings.
  6. Click Done.
  7. Tip


    When debugging applications: Consider testing attributes with static known good values. For example, change dynamic IDP based fields to static with known good values.
    When debugging policy based applications: Test with no policy or open policy first.

Configure Access Gateway for debug and monitoring

The Access Gateway Management console can be used to provide a running display of all system log messages. In this optional section we enable debug and monitor Access Gateway using this functionality.

  1. Open a terminal window and connect to the Access Gateway Management console.
  2. Enter 4 - Monitor.
  3. Enter 2 - Enable debug.
  4. Enter 1 - Monitor logs.
    The AccessAccess Gateway Management console will then begin displaying log messages.


Completed application testing as required.

  1. The Applications tab, on the row containing the application, click Goto application > SP Initiated.
  2. Repeat testing using Goto application > IDP Initiated.
  3. Repeat testing using each specialized policy URI.
  4. If required, disable debugging.

Disable debug

If displaying debug statements at the command line:

  1. Return to the Access Gateway Management console.
  2. Enter [ctrl][c] to exit the log display.
  3. Enter 3 - Disable debug.
  4. Exit the command line console

If application debug is enabled:

  1. Return to the Access Gateway Admin UI console
  2. Navigate to the application being tested
  3. Expand the Setting sub tab.
  4. Expand the Essentials sub tab.
  5. Return the Protected Web Resource field back to its original value.
  6. Expand the Advanced sub tab.
  7. Set the Debug toggle to Disable.
  8. Save your changes.