Reset Access Gateway Command Line

To reset the Access Gateway command line console:

Using command line ssh, connect to the new instance:


$ ssh oag-mgmt@adminAn abbreviation of administrator. This is the individual(s) who have access to the Okta Administrator Dashboard. They control the provisioning and deprovisioning of end users, the assigning of apps, the resetting of passwords, and the overall end user experience. Only administrators have the Administration button on the upper right side of the My Applications page.
oag-mgmt@... password:OktaMgmt@123

Reset the Gateway
Note: On-premises installations are not required to re-initialize the gateway

At the command line main menu:

  1. Select 5 System.
  2. Select 7 - Reset.
  3. Select Y to clear the configuration.

  4. Select Y to initialize the system.

 

Note

Note

The instance may pause for 2-3 minutes but will respond and will return to the system menu.

After the system is initialized successfully, press any key to return to the menu.

Verify Configuration

  1. Press x to return to the main menu.

  2. Select 1 - Network

  3. Select 3 - Test network configuration .
    Okta Access Gateway will attempt to contact www.okta.com and report any errors.

  4. Select 9 - Connectivity test.
    Enter www.okta.com as host and 443 as port.

  5. Confirm that the connection was successful.

Top